PAK-40 Anti- - Revision history

73.69.193.6: Undo revision 1008250 by 192.42.116.179 (talk)

2026-03-26T03:36:05Z

Undo revision 1008250 by 192.42.116.179 (talk)

← Older revision	Revision as of 03:36, 26 March 2026
Line 1:	Line 1:
		The PaK-40 Anti-Tank gun forms the majority of German towed AT capability in late war FoW. With an AP rating of 12 and RoF 2, it will take care of Shermans and T-34s with ease, and the gun shield makes it a little bit better at surviving.

		== The PaK-40 in the real world ==

		While it may seem impossible to many neckbeards and wargamers, the real world is in fact a thing. And in the aforementioned 'real world,' Nazi Germany went to war with, well, a lot of people. A lot of people with tanks. To kill these people (and blow up their tanks), the Germans came up with several types of AT (anti-tank) gun - first and foremost among these at the beginning of the war being the 3.7cm PaK-36. However, even before the war began, the Germans saw several flaws with the PaK-36 (namely, it wasn't good enough at killing tanks), and started a program to design some extremely technologically advanced AT guns, featuring all kinds of expensive, lightweight materials.

		Following fears about the effectiveness of the then-brand new 5cm PaK-38 right at the beginning of the war, German engineers started making a new anti-tank gun, which would be designated as the 7.5cm Panzerabwehrkanone 40 (75mm Anti-Tank cannon to those of us in the anglosphere). This new gun offered much greater capabilities against enemy armoured vehicles whilst still being small, light and practical enough to be put into service. Furthermore, the gun, carriage and shield were made entirely from steel, a necessary step when the Luftwaffe had priority for all the lighter or more expensive materials needed for the PaK-38. Firing a 6.8kg shell at over 790 m/s, the PaK-40 could go through 132mm of Rolled Homogenous Steel Plate at 500m.

		Whilst originally intended as a towed AT gun, there would, over the course of the war, be a great many vehicles fitted with the PaK-40, or its dedicated AFV-mounted variant, the Kampfwagenkanone-40 (Military Vehicle Gun 40, shortened to KwK-40 - this was designated StuK, or Sturmkanone 40, when mounted in assault guns but was identical to the KwK). These vehicles included assault guns such as the StuG III (Ausfuhrung F onwards), tank destroyers such as the Marder I, II and III and actual tanks such as the Panzer IV (Ausf. F.2 onwards). 23,303 PaK-40s were produced during the war, and it remained a potent and effective weapon right until the end.

		== The PaK-40 in Flames of War ==

		=== Late War ===

		By Late War, the PaK-40 appears in every German intelligence briefing, in one form or another. Being Germans, the PaK-40 is an expensive piece of kit, but at AP 12 it is a dangerous weapon to most enemy units. However, one must be wary of the late-late war books (such as Bridge at Remagen or Berlin), as by the time the war comes to an end your opponents will be able to field M26 Pershings, IS-2s and other such tanks with increased frontal armour. Firepower 3+ and RoF 2 are pretty bog-standard for AT Guns, but the addition of a Gun Shield makes it a little better at surviving. Of course, being a man-packed gun it moves pathetically slowly, and a concerted assault by infantry will make short work of your anti-tank platoon.

		==== Tactics ====

		The best way to use the PaK-40 is, where possible, to deploy it as an ambush.

192.42.116.179: Blanked the page

2026-02-10T23:09:21Z

Blanked the page

← Older revision		Revision as of 23:09, 10 February 2026
Line 1:		Line 1:
	The PaK-40 Anti-Tank gun forms the majority of German towed AT capability in late war FoW. With an AP rating of 12 and RoF 2, it will take care of Shermans and T-34s with ease, and the gun shield makes it a little bit better at surviving.

	~~== The PaK-40 in the real world ==~~

	While it may seem impossible to many neckbeards and wargamers, the real world is in fact a thing. And in the aforementioned 'real world,' Nazi Germany went to war with, well, a lot of people. A lot of people with tanks. To kill these people (and blow up their tanks), the Germans came up with several types of AT (anti-tank) gun - first and foremost among these at the beginning of the war being the 3.7cm PaK-36. However, even before the war began, the Germans saw several flaws with the PaK-36 (namely, it wasn't good enough at killing tanks), and started a program to design some extremely technologically advanced AT guns, featuring all kinds of expensive, lightweight materials.

	Following fears about the effectiveness of the then-brand new 5cm PaK-38 right at the beginning of the war, German engineers started making a new anti-tank gun, which would be designated as the 7.5cm Panzerabwehrkanone 40 (75mm Anti-Tank cannon to those of us in the anglosphere). This new gun offered much greater capabilities against enemy armoured vehicles whilst still being small, light and practical enough to be put into service. Furthermore, the gun, carriage and shield were made entirely from steel, a necessary step when the Luftwaffe had priority for all the lighter or more expensive materials needed for the PaK-38. Firing a 6.8kg shell at over 790 m/s, the PaK-40 could go through 132mm of Rolled Homogenous Steel Plate at 500m.

	Whilst originally intended as a towed AT gun, there would, over the course of the war, be a great many vehicles fitted with the PaK-40, or its dedicated AFV-mounted variant, the Kampfwagenkanone-40 (Military Vehicle Gun 40, shortened to KwK-40 - this was designated StuK, or Sturmkanone 40, when mounted in assault guns but was identical to the KwK). These vehicles included assault guns such as the StuG III (Ausfuhrung F onwards), tank destroyers such as the Marder I, II and III and actual tanks such as the Panzer IV (Ausf. F.2 onwards). 23,303 PaK-40s were produced during the war, and it remained a potent and effective weapon right until the end.

	~~== The PaK-40 in Flames of War ==~~

	~~=== Late War ===~~

	By Late War, the PaK-40 appears in every German intelligence briefing, in one form or another. Being Germans, the PaK-40 is an expensive piece of kit, but at AP 12 it is a dangerous weapon to most enemy units. However, one must be wary of the late-late war books (such as Bridge at Remagen or Berlin), as by the time the war comes to an end your opponents will be able to field M26 Pershings, IS-2s and other such tanks with increased frontal armour. Firepower 3+ and RoF 2 are pretty bog-standard for AT Guns, but the addition of a Gun Shield makes it a little better at surviving. Of course, being a man-packed gun it moves pathetically slowly, and a concerted assault by infantry will make short work of your anti-tank platoon.

	~~==== Tactics ====~~

	~~The best way to use the PaK-40 is, where possible, to deploy it as an ambush.~~

imported>Administrator: 7 revisions imported

2023-06-22T14:18:03Z

7 revisions imported

← Older revision	Revision as of 14:18, 22 June 2023
(No difference)

imported>Administrator: 1 revision imported

2023-06-19T02:54:17Z

1 revision imported

← Older revision	Revision as of 02:54, 19 June 2023
(No difference)

1d4chan>SomeDuck at 09:46, 6 February 2019

2019-02-06T09:46:32Z

← Older revision		Revision as of 09:46, 6 February 2019
Line 8:		Line 8:

	Whilst originally intended as a towed AT gun, there would, over the course of the war, be a great many vehicles fitted with the PaK-40, or its dedicated AFV-mounted variant, the Kampfwagenkanone-40 (Military Vehicle Gun 40, shortened to KwK-40 - this was designated StuK, or Sturmkanone 40, when mounted in assault guns but was identical to the KwK). These vehicles included assault guns such as the StuG III (Ausfuhrung F onwards), tank destroyers such as the Marder I, II and III and actual tanks such as the Panzer IV (Ausf. F.2 onwards). 23,303 PaK-40s were produced during the war, and it remained a potent and effective weapon right until the end.		Whilst originally intended as a towed AT gun, there would, over the course of the war, be a great many vehicles fitted with the PaK-40, or its dedicated AFV-mounted variant, the Kampfwagenkanone-40 (Military Vehicle Gun 40, shortened to KwK-40 - this was designated StuK, or Sturmkanone 40, when mounted in assault guns but was identical to the KwK). These vehicles included assault guns such as the StuG III (Ausfuhrung F onwards), tank destroyers such as the Marder I, II and III and actual tanks such as the Panzer IV (Ausf. F.2 onwards). 23,303 PaK-40s were produced during the war, and it remained a potent and effective weapon right until the end.

			== The PaK-40 in Flames of War ==

			=== Late War ===

			By Late War, the PaK-40 appears in every German intelligence briefing, in one form or another. Being Germans, the PaK-40 is an expensive piece of kit, but at AP 12 it is a dangerous weapon to most enemy units. However, one must be wary of the late-late war books (such as Bridge at Remagen or Berlin), as by the time the war comes to an end your opponents will be able to field M26 Pershings, IS-2s and other such tanks with increased frontal armour. Firepower 3+ and RoF 2 are pretty bog-standard for AT Guns, but the addition of a Gun Shield makes it a little better at surviving. Of course, being a man-packed gun it moves pathetically slowly, and a concerted assault by infantry will make short work of your anti-tank platoon.

			==== Tactics ====

			The best way to use the PaK-40 is, where possible, to deploy it as an ambush.

1d4chan>SomeDuck at 09:37, 6 February 2019

2019-02-06T09:37:11Z

← Older revision		Revision as of 09:37, 6 February 2019
Line 7:		Line 7:
	Following fears about the effectiveness of the then-brand new 5cm PaK-38 right at the beginning of the war, German engineers started making a new anti-tank gun, which would be designated as the 7.5cm Panzerabwehrkanone 40 (75mm Anti-Tank cannon to those of us in the anglosphere). This new gun offered much greater capabilities against enemy armoured vehicles whilst still being small, light and practical enough to be put into service. Furthermore, the gun, carriage and shield were made entirely from steel, a necessary step when the Luftwaffe had priority for all the lighter or more expensive materials needed for the PaK-38. Firing a 6.8kg shell at over 790 m/s, the PaK-40 could go through 132mm of Rolled Homogenous Steel Plate at 500m.		Following fears about the effectiveness of the then-brand new 5cm PaK-38 right at the beginning of the war, German engineers started making a new anti-tank gun, which would be designated as the 7.5cm Panzerabwehrkanone 40 (75mm Anti-Tank cannon to those of us in the anglosphere). This new gun offered much greater capabilities against enemy armoured vehicles whilst still being small, light and practical enough to be put into service. Furthermore, the gun, carriage and shield were made entirely from steel, a necessary step when the Luftwaffe had priority for all the lighter or more expensive materials needed for the PaK-38. Firing a 6.8kg shell at over 790 m/s, the PaK-40 could go through 132mm of Rolled Homogenous Steel Plate at 500m.

	Whilst originally intended as a towed AT gun, there would, over the course of the war, be a great many vehicles fitted with the PaK-40, or its dedicated AFV-mounted variant, the Kampfwagenkanone-40 (Military Vehicle Gun 40, shortened to KwK-40 - this was designated StuK, or Sturmkanone 40, when mounted in assault guns but was identical to the KwK). These vehicles included assault guns such as the StuG III (Ausfuhrung F onwards), tank destroyers such as the Marder I, II and III and actual tanks such as the Panzer IV (Ausf. F.2 onwards).		Whilst originally intended as a towed AT gun, there would, over the course of the war, be a great many vehicles fitted with the PaK-40, or its dedicated AFV-mounted variant, the Kampfwagenkanone-40 (Military Vehicle Gun 40, shortened to KwK-40 - this was designated StuK, or Sturmkanone 40, when mounted in assault guns but was identical to the KwK). These vehicles included assault guns such as the StuG III (Ausfuhrung F onwards), tank destroyers such as the Marder I, II and III and actual tanks such as the Panzer IV (Ausf. F.2 onwards). 23,303 PaK-40s were produced during the war, and it remained a potent and effective weapon right until the end.

1d4chan>SomeDuck at 09:36, 6 February 2019

2019-02-06T09:36:19Z

← Older revision		Revision as of 09:36, 6 February 2019
Line 7:		Line 7:
	Following fears about the effectiveness of the then-brand new 5cm PaK-38 right at the beginning of the war, German engineers started making a new anti-tank gun, which would be designated as the 7.5cm Panzerabwehrkanone 40 (75mm Anti-Tank cannon to those of us in the anglosphere). This new gun offered much greater capabilities against enemy armoured vehicles whilst still being small, light and practical enough to be put into service. Furthermore, the gun, carriage and shield were made entirely from steel, a necessary step when the Luftwaffe had priority for all the lighter or more expensive materials needed for the PaK-38. Firing a 6.8kg shell at over 790 m/s, the PaK-40 could go through 132mm of Rolled Homogenous Steel Plate at 500m.		Following fears about the effectiveness of the then-brand new 5cm PaK-38 right at the beginning of the war, German engineers started making a new anti-tank gun, which would be designated as the 7.5cm Panzerabwehrkanone 40 (75mm Anti-Tank cannon to those of us in the anglosphere). This new gun offered much greater capabilities against enemy armoured vehicles whilst still being small, light and practical enough to be put into service. Furthermore, the gun, carriage and shield were made entirely from steel, a necessary step when the Luftwaffe had priority for all the lighter or more expensive materials needed for the PaK-38. Firing a 6.8kg shell at over 790 m/s, the PaK-40 could go through 132mm of Rolled Homogenous Steel Plate at 500m.

	Whilst originally intended as a towed AT gun, there would, over the course of the war, be a great many vehicles fitted with the PaK-40, or its dedicated AFV-mounted variant, the Kampfwagenkanone-40 (Military Vehicle Gun 40, shortened to KwK-40).		Whilst originally intended as a towed AT gun, there would, over the course of the war, be a great many vehicles fitted with the PaK-40, or its dedicated AFV-mounted variant, the Kampfwagenkanone-40 (Military Vehicle Gun 40, shortened to KwK-40 - this was designated StuK, or Sturmkanone 40, when mounted in assault guns but was identical to the KwK). These vehicles included assault guns such as the StuG III (Ausfuhrung F onwards), tank destroyers such as the Marder I, II and III and actual tanks such as the Panzer IV (Ausf. F.2 onwards).

1d4chan>SomeDuck at 12:18, 5 February 2019

2019-02-05T12:18:13Z

← Older revision		Revision as of 12:18, 5 February 2019
Line 7:		Line 7:
	Following fears about the effectiveness of the then-brand new 5cm PaK-38 right at the beginning of the war, German engineers started making a new anti-tank gun, which would be designated as the 7.5cm Panzerabwehrkanone 40 (75mm Anti-Tank cannon to those of us in the anglosphere). This new gun offered much greater capabilities against enemy armoured vehicles whilst still being small, light and practical enough to be put into service. Furthermore, the gun, carriage and shield were made entirely from steel, a necessary step when the Luftwaffe had priority for all the lighter or more expensive materials needed for the PaK-38. Firing a 6.8kg shell at over 790 m/s, the PaK-40 could go through 132mm of Rolled Homogenous Steel Plate at 500m.		Following fears about the effectiveness of the then-brand new 5cm PaK-38 right at the beginning of the war, German engineers started making a new anti-tank gun, which would be designated as the 7.5cm Panzerabwehrkanone 40 (75mm Anti-Tank cannon to those of us in the anglosphere). This new gun offered much greater capabilities against enemy armoured vehicles whilst still being small, light and practical enough to be put into service. Furthermore, the gun, carriage and shield were made entirely from steel, a necessary step when the Luftwaffe had priority for all the lighter or more expensive materials needed for the PaK-38. Firing a 6.8kg shell at over 790 m/s, the PaK-40 could go through 132mm of Rolled Homogenous Steel Plate at 500m.

	Whilst originally intended as a towed AT gun, there would, over the course of the war be a great many vehicles		Whilst originally intended as a towed AT gun, there would, over the course of the war, be a great many vehicles fitted with the PaK-40, or its dedicated AFV-mounted variant, the Kampfwagenkanone-40 (Military Vehicle Gun 40, shortened to KwK-40).

1d4chan>SomeDuck: /* The PaK-40 in the real world */

2019-02-05T12:16:55Z

The PaK-40 in the real world

← Older revision		Revision as of 12:16, 5 February 2019
Line 3:		Line 3:
	== The PaK-40 in the real world ==		== The PaK-40 in the real world ==

	While it may seem impossible to many neckbeards and wargamers, the real world is in fact a thing. Following fears about the effectiveness of the then-brand new 5cm PaK, German engineers started making a new anti-tank gun, which would be designated as the 7.5cm Panzerabwehrkanone 40 (75mm Anti-Tank cannon to those of us in the anglosphere). This new gun offered much greater capabilities against enemy armoured vehicles whilst still being small, light and practical enough to be put into service.		While it may seem impossible to many neckbeards and wargamers, the real world is in fact a thing. And in the aforementioned 'real world,' Nazi Germany went to war with, well, a lot of people. A lot of people with tanks. To kill these people (and blow up their tanks), the Germans came up with several types of AT (anti-tank) gun - first and foremost among these at the beginning of the war being the 3.7cm PaK-36. However, even before the war began, the Germans saw several flaws with the PaK-36 (namely, it wasn't good enough at killing tanks), and started a program to design some extremely technologically advanced AT guns, featuring all kinds of expensive, lightweight materials.

			Following fears about the effectiveness of the then-brand new 5cm PaK-38 right at the beginning of the war, German engineers started making a new anti-tank gun, which would be designated as the 7.5cm Panzerabwehrkanone 40 (75mm Anti-Tank cannon to those of us in the anglosphere). This new gun offered much greater capabilities against enemy armoured vehicles whilst still being small, light and practical enough to be put into service. Furthermore, the gun, carriage and shield were made entirely from steel, a necessary step when the Luftwaffe had priority for all the lighter or more expensive materials needed for the PaK-38. Firing a 6.8kg shell at over 790 m/s, the PaK-40 could go through 132mm of Rolled Homogenous Steel Plate at 500m.

			Whilst originally intended as a towed AT gun, there would, over the course of the war be a great many vehicles

1d4chan>SomeDuck at 12:07, 5 February 2019

2019-02-05T12:07:20Z

← Older revision		Revision as of 12:07, 5 February 2019
Line 3:		Line 3:
	== The PaK-40 in the real world ==		== The PaK-40 in the real world ==

	While it may seem impossible to many neckbeards and wargamers, the real world is in fact a thing. Following fears about the effectiveness of the then-brand new 5cm PaK, German engineers started making a new anti-tank gun, which would be designated as the 7.5cm Panzerabwehrkanone 40 (75mm Anti-Tank cannon to those of us in the anglosphere). This new gun offered much greater ~~armour~~		While it may seem impossible to many neckbeards and wargamers, the real world is in fact a thing. Following fears about the effectiveness of the then-brand new 5cm PaK, German engineers started making a new anti-tank gun, which would be designated as the 7.5cm Panzerabwehrkanone 40 (75mm Anti-Tank cannon to those of us in the anglosphere). This new gun offered much greater capabilities against enemy armoured vehicles whilst still being small, light and practical enough to be put into service.